WeMa-Step Ladder Stabiliser FIX

99,90€

The FIX secures the ladder even where there is no gutter. Turned around, it becomes a flat roof rail, and with the triangular cut-out and a ratchet strap the ladder holds on trees, lamp posts and posts.

Delivery time: 3-5 working days

57 in stock

SKU: WS-2023-11 Category:

Description

The FIX is the most versatile WeMa-Step ladder stabiliser. It adapts without conversion: at the gutter you work with the U-profile. Turned by 180 degrees, the flat rail rests on the flat roof. And with the triangular cut-out in the rail, the ladder leans securely against a tree, lamp post or post.

Who the FIX is for

For anyone who climbs ladders away from the house too: for picking fruit and pruning trees in the garden, for work on masts and lamp posts, or for landscaping and municipal services. It works just as well at the gutter and on the flat roof.

What sets it apart from the other models

  • Turn by 180 degrees instead of swapping rails: U-profile for the gutter, flat rail for the flat roof
  • Triangular cut-out that sits securely against trees and lamp posts
  • Side holes for a ratchet strap to lash the ladder to a tree or post for extra security (ratchet strap also available as an accessory)
  • Quick-release clamp and lift mechanism, fits almost all standard leaning ladders with square rungs

What is included

  • 1 x WeMa-Step ladder stabiliser FIX (U-bracket and flat roof rail in one piece)
  • 1 x instructions for use and fitting
  • Ratchet strap not included, available separately

As with all WeMa-Step models

  • Safe from the very first climb, protection against tipping sideways and backwards
  • Leaning angle of 65 to 75 degrees set by the design, the U-bracket rests over at least one gutter bracket
  • Sturdy steel construction, U-bracket and flat roof rail with foam rubber coating

German engineering, patent

Additional information

Weight 1,6 kg
Dimensions 27-42 × 28 × 12 cm
material

galvanised steel

geeignet-fuer

Container, Gutters, Flat roofs, Mobile use, Motorhomes, Caravans, Tree/Mast

Product safety

Manufacturer information

C-Concepts Vertriebs GmbH
Siebenbornstraße 26
56337 Simmern
Germany
Phone: +49 2620 940 9928
Email: info@cconcepts.de

Safety instructions

  • Stay alert!
  • Technical modifications are not permitted and can be dangerous.
  • All screw connections must be checked before each use of the product.
  • All screw connections must be tightened more than hand-tight.
  • The product must be checked for visible damage before each use.

Intended use:
The gutter holder may only be fitted to leaning ladders with an inner width of at least 295 mm. For rectangular rungs, the rung walls must run parallel to the stile. The leaning ladder must be used at an angle between 65° and 75°. The angle is ensured by the geometry of the WeMa-Step. The ground must be load-bearing, level and slip-resistant. The gutter holder must not be used if it is damaged. Before each use, check whether cracks or deformations reduce the stability of the gutter holder. The gutter holder must not be used for any other purpose and only in the intended position on load-bearing gutters. The gutter must be sufficiently load-bearing. After setting up the ladder, make sure that the U-rails of the WeMa-Step sit correctly on the gutter bead.