WeMa-Step Ladder Stabiliser UNIVERSAL
119,90€
incl. 19% VAT plus shipping costs
One rail for everything: the UNIVERSAL rests securely on the gutter and on the flat roof without you having to swap rails. An adjusting screw adapts it to the rung spacing of your ladder.
129 in stock
Description
The UNIVERSAL has no rail change. Its universal rail rests on the gutter just as securely as on a flat roof, a motorhome or a caravan. On the flat roof it locks in firmly. That makes it the WeMa-Step ladder stabiliser for anyone who often switches between gutter and flat roof.
Who the UNIVERSAL is for
For anyone who sometimes sets the ladder at a gutter and sometimes at a flat edge and does not want to convert anything. It fits almost all standard leaning ladders with square rungs.
What sets it apart from the other models
- One universal rail for gutter and flat roof instead of two separate rails
- Adjusting screw to set the distance to the rungs precisely
- Firm locking on flat roofs
- Quick-release clamp to tighten on the ladder
Difference from the PRO 2.0: the PRO 2.0 has two separate rails and a lift that can be set with a clamping lever.
What is included
- 1 x WeMa-Step ladder stabiliser UNIVERSAL
- 1 x universal rail for gutter, flat roof, motorhome and caravan
- 1 x instructions for use and fitting
As with all WeMa-Step models
- Safe from the very first climb, protection against tipping sideways and backwards
- Leaning angle of 65 to 75 degrees set by the design, the rail rests over at least one gutter bracket
- Sturdy steel construction with foam rubber in the rung holders, the gutter stays undamaged

Additional information
| Dimensions | 26 × 67 × 14 cm |
|---|---|
| material | galvanised steel |
| geeignet-fuer | Container, Gutters, Flat roofs, Mobile use, Motorhomes, Caravans |
Product safety
Manufacturer information
C-Concepts Vertriebs GmbH
Siebenbornstraße 26
56337 Simmern
Germany
Phone: +49 2620 940 9928
Email: info@cconcepts.de
Safety instructions
- Stay alert!
- Technical modifications are not permitted and can be dangerous.
- All screw connections must be checked before each use of the product.
- All screw connections must be tightened more than hand-tight.
- The product must be checked for visible damage before each use.
Intended use:
The gutter holder may only be fitted to leaning ladders with an inner width of at least 295 mm. For rectangular rungs, the rung walls must run parallel to the stile. The leaning ladder must be used at an angle between 65° and 75°. The angle is ensured by the geometry of the WeMa-Step. The ground must be load-bearing, level and slip-resistant. The gutter holder must not be used if it is damaged. Before each use, check whether cracks or deformations reduce the stability of the gutter holder. The gutter holder must not be used for any other purpose and only in the intended position on load-bearing gutters. The gutter must be sufficiently load-bearing. After setting up the ladder, make sure that the U-rails of the WeMa-Step sit correctly on the gutter bead.







