WeMa-Step Ladder Stabiliser PRO 2.0
129,90€
incl. 19% VAT plus shipping costs
The model for anyone who climbs ladders often and in changing places. The lift can be set with a clamping lever, a safety pin holds everything in place, and the matching rails for gutter and flat roof are included.
45 in stock
Description
The PRO 2.0 is made for frequent use. If you work at the gutter one day and climb onto a flat roof, a container or a motorhome the next, it gives you both rails. It is the WeMa-Step ladder stabiliser for pitched and flat roofs.
Who the PRO 2.0 is for
For trade businesses, caretaker services and anyone who regularly sets their ladder in different places. It fits almost all standard leaning ladders with square rungs.
What sets it apart from the other models
- Lift adjustable with clamping lever, so it adapts quickly to different ladders
- Safety pin as additional locking
- Quick-release clamp to tighten on the ladder
- U-rails for the gutter and flat roof rails for flat roofs, motorhomes, caravans and containers as a set
Difference from the UNIVERSAL: with the PRO 2.0 you switch between two rails, the UNIVERSAL has one rail for both.
What is included
- 1 x WeMa-Step ladder stabiliser PRO 2.0
- 1 x U-rails for the gutter
- 1 x flat roof rails for flat roofs, motorhomes, caravans and containers
- 1 x instructions for use and fitting
Funding for businesses (Germany)
The PRO 2.0 is on the BG BAU list of ladder accessories (item no. WS-2019-2). In Germany, member companies of the BG BAU can have 50% of the purchase cost reimbursed through the occupational safety bonus, up to a maximum of 100 euros per item. The funding does not apply to private customers.
As with all WeMa-Step models
- Safe from the very first climb, protection against tipping sideways and backwards
- Leaning angle of 65 to 75 degrees set by the design, the U-bracket rests over at least one gutter bracket
- Sturdy steel construction with foam rubber in the rung holders, the gutter stays undamaged

Additional information
| Dimensions | 31 × 67 × 13,5 cm |
|---|---|
| material | galvanised steel |
| geeignet-fuer | Container, Gutters, Flat roofs, Motorhomes, Caravans |
Product safety
Manufacturer information
C-Concepts Vertriebs GmbH
Siebenbornstraße 26
56337 Simmern
Germany
Phone: +49 2620 940 9928
Email: info@cconcepts.de
Safety instructions
- Stay alert!
- Technical modifications are not permitted and can be dangerous.
- All screw connections must be checked before each use of the product.
- All screw connections must be tightened more than hand-tight.
- The product must be checked for visible damage before each use.
Intended use:
The gutter holder may only be fitted to leaning ladders with an inner width of at least 295 mm. For rectangular rungs, the rung walls must run parallel to the stile. The leaning ladder must be used at an angle between 65° and 75°. The angle is ensured by the geometry of the WeMa-Step. The ground must be load-bearing, level and slip-resistant. The gutter holder must not be used if it is damaged. Before each use, check whether cracks or deformations reduce the stability of the gutter holder. The gutter holder must not be used for any other purpose and only in the intended position on load-bearing gutters. The gutter must be sufficiently load-bearing. After setting up the ladder, make sure that the U-rails of the WeMa-Step sit correctly on the gutter bead.






