Description
The key points at a glance:
- Safe from the very first climb!
- Quick and easy fitting to almost any ladder
- Protection against tipping sideways and backwards
- Easy and safe stepping across
- Simply hook into the gutter
- The U-bracket generally rests over at least one gutter bracket
- Leaning angle of 65° – 75° taken into account by the design
- Fits almost all standard square-rung leaning ladders thanks to the lift mechanism
- Gutters are spared from damage
- Sturdy, long-lasting steel construction
- Increased slip resistance thanks to foam rubber coating in the rung holders
- Variable rung mount
What is included:
1 x WeMa-Step ladder stabiliser BASIC 1.0
1 x U-rails for gutter
1 x instructions for use and fitting
(Optionally available: flat roof rail set 1.0 for caravans, motorhomes and all flat roofs)

Additional information
| Dimensions | 11 × 67 × 7 cm |
|---|---|
| material | galvanised steel |
| geeignet-fuer | Gutters |
Product safety
Manufacturer information
C-Concepts Vertriebs GmbH
Siebenbornstraße 26
56337 Simmern
Germany
Phone: +49 2620 940 9928
Email: info@cconcepts.de
Safety instructions
- Stay alert!
- Technical modifications are not permitted and can be dangerous.
- All screw connections must be checked before each use of the product.
- All screw connections must be tightened more than hand-tight.
- The product must be checked for visible damage before each use.
Intended use:
The gutter holder may only be fitted to leaning ladders with an inner width of at least 295 mm. For rectangular rungs, the rung walls must run parallel to the stile. The leaning ladder must be used at an angle between 65° and 75°. The angle is ensured by the geometry of the WeMa-Step. The ground must be load-bearing, level and slip-resistant. The gutter holder must not be used if it is damaged. Before each use, check whether cracks or deformations reduce the stability of the gutter holder. The gutter holder must not be used for any other purpose and only in the intended position on load-bearing gutters. The gutter must be sufficiently load-bearing. After setting up the ladder, make sure that the U-rails of the WeMa-Step sit correctly on the gutter bead.






