WeMa-Step Ladder Stabiliser BASIC 2.0

99,90€

The entry-level model for anyone who wants to secure the ladder at the gutter. Easy to fit, hooked into the gutter, and the ladder tips neither sideways nor backwards.

Delivery time: 3-5 working days

63 in stock

SKU: WS-2019-4 Category:

Description

The BASIC 2.0 is our entry-level model, built for one place of use: the gutter. If you lean the ladder against the gutter for cleaning it, for work on the facade or at the roof edge, it gives you the WeMa-Step ladder stabiliser at the lowest price.

Who the BASIC 2.0 is for

For homeowners and businesses that almost always lean their ladder against a gutter. It fits almost all standard leaning ladders with square rungs. The rung mount is variable, and the lift mechanism compensates for different ladders.

What sets it apart from the other models

  • Only U-rails for the gutter are included. This keeps the price low.
  • Adding a flat roof, caravan or container later? Then the WeMa-Step Flat Roof Rails 2.0 fit as an accessory.
  • If you need gutter and flat roof from the start, you are better off with the PRO 2.0 or UNIVERSAL.

What is included

  • 1 x WeMa-Step ladder stabiliser BASIC 2.0
  • 1 x U-rails for the gutter
  • 1 x instructions for use and fitting

Funding for businesses (Germany)

The BASIC 2.0 is on the BG BAU list of ladder accessories (item no. WS-2019-4). In Germany, member companies of the BG BAU can have 50% of the purchase cost reimbursed through the occupational safety bonus, up to a maximum of 100 euros per item. The funding does not apply to private customers.

As with all WeMa-Step models

  • Safe from the very first climb, protection against tipping sideways and backwards
  • Leaning angle of 65 to 75 degrees set by the design, the U-bracket rests over at least one gutter bracket
  • Sturdy steel construction with foam rubber in the rung holders, the gutter stays undamaged

German engineering, patent

Additional information

Dimensions 11 × 67 × 7 cm
material

galvanised steel

geeignet-fuer

Gutters

Product safety

Manufacturer information

C-Concepts Vertriebs GmbH
Siebenbornstraße 26
56337 Simmern
Germany
Phone: +49 2620 940 9928
Email: info@cconcepts.de

Safety instructions

  • Stay alert!
  • Technical modifications are not permitted and can be dangerous.
  • All screw connections must be checked before each use of the product.
  • All screw connections must be tightened more than hand-tight.
  • The product must be checked for visible damage before each use.

Intended use:
The gutter holder may only be fitted to leaning ladders with an inner width of at least 295 mm. For rectangular rungs, the rung walls must run parallel to the stile. The leaning ladder must be used at an angle between 65° and 75°. The angle is ensured by the geometry of the WeMa-Step. The ground must be load-bearing, level and slip-resistant. The gutter holder must not be used if it is damaged. Before each use, check whether cracks or deformations reduce the stability of the gutter holder. The gutter holder must not be used for any other purpose and only in the intended position on load-bearing gutters. The gutter must be sufficiently load-bearing. After setting up the ladder, make sure that the U-rails of the WeMa-Step sit correctly on the gutter bead.